Configuration of Broadband and leased line in Switch
FOLLOW THE FOLLOWING STEPS FOR CONFIGURATION OF BROAD BAND MODEM. 01. PING 192.168.1.1(DEFAULT IP ADDRESS OF BROAD BAND MODEM) 02. OPERN YOUR WEB BROWSER TYPE http://192.168.1.1 03. type user name: admin, password: admin. 04. goto advanced setup>WAN 05. click on edit on line containg vpi/vci 0/35. 06. click on next > change the connection type to pppoe 07. click on next > enter username and password and service name. 08. click on next>next> save 09. again advanced setup screen will appears 10. click on save/reboot. after two minutes. 01. again open the web browser and type 192.168.1.1 02. enter username : admin and password: admin 03. click on device info. 04. note down the primary dns server and secondary dns server. 05. configure the system in which you want broad band as follows ip address 192.168.1.x subnet mask 255.255.255.0 default gateway 192.168.1.1 preferred dns server: <enter the value from step 4> alternate dns server:<enter the value from step 4...